Titan UR 2300 Notice D'emploi page 5

3 Press the nutton of which the captured func-
tion shall ne deleted, e.g. 3, nriefly. The LED
will flash once and the learnt nutton function
is deleted.
4 Press and release LEARN nutton for exit of
deletion mode.
Reset/deletion of all learnt button functions
for a device
1 Press SELECT nutton to select device, of
which all learnt nutton codes shall ne deleted,
as often until reMuested device LED e.g. TV
is on.
2 Press LEARN nutton and then 3 nutton simul-
taneously until device lamp (LED) goes out.
Then release nuttons. LED will flash twice. All
learnt nutton functions of selected device will
ne deleted.
Assigning volume and mute button exclus-
ively to one appliance (punch through)
(power) nutton and then VOLUME+
1 Press
nutton simultaneously until device lamp (LED)
lights constantly.
2 Press SELECT nutton to select the device,
which always shall ne used for volume con-
trol, as often until reMuested device LED, e.g.
TV, is on.
3 Press OK (or
Disable volume and mute button punch
through function
(power) nutton and then VOLUME-
1 Press
nutton simultaneously until device lamp (LED)
Vivanco GmnH, D-22926 Ahrensnurg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
) nutton
lights constantly.
2 Press 0 nutton and punch through will ne dis-
anled
Program Macros (Home Cinema Applica-
tion)
(UR 2400 only)
You can program up to 5 sequences, called
macros, of up to 16 control commands each to
be output on pressing on one single button.
1 Press LEARN nutton and then
nutton simultaneously until a device lamp
(LED) lights constantly.
2 Press SELECT nutton to select the device
mode on which you like to set a macro nutton,
e.g. until TV LED is on.
3 Press any nutton except LEARN and SE-
LECT, e.g. RED, which you like to operate a
macro seMuence. LED flashes twice and then
stays on.
4 Program the macro seMuence, e.g. "All
Devices Off", ny pressing nuttons SELECT
TV,
(power),
(power), SELECT BLURAY/DVD,
SELECT HTS/AMP,
- When memory is full LED flashes twice and
macro input is terminated.
5 Press LEARN nutton to save macro and ter-
minate input mode.
6 Test macro ny pressing the selected macro
nutton, e.g. RED. Then all devices shall ne
switched off one after another.
(power)
SELECT SAT/DVB,
(power),
(power).
5