Advanced Operations; Handset Registration; Handset Group Subscription - EnGenius EP801 Manuel D'utilisation

Advanced Operations

Handset Registration

1. If your handset(s) is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If Handset ID as "00," that means it is a new handset or the ID has been
erased. You need to register the handset with the base station.
3. Registration:
a. Press MENU-7 to enter the registration mode
b. Press and hold the base's Registration (REG)
button for 2 seconds until the
lighting up and flashing, also the base will emit
ringing to remind you the base is in the registration
mode..
c. Press handset key "1", this completes the
registration process. The base station will assign a
handset ID between 12 and 19. The assigned ID
will be displayed on the handset LCD, indicating
successful registration.
d. Repeat above steps for all additional handsets.
4. De-registration:
a. You can de-register the handset you're using from
the base. De-registration will reset the Handset ID
to 00, erase the system security code, and free up
the old ID for future registration.
b. After deregistration, the handset will not be able to
use the base to make or receive phone calls, nor
can it intercom other handsets.
c. Press MENU-7 to enter the registration mode
d. Press and hold the base's REG button for 2
seconds until the and
and flashing.
e. Press the handset number key "2", this completes
the de-registration process. Upon successful de-
and LEDs
LEDs lighting up
~37~
registration, the handset will show "Please
register".
Notes:
1. The base has a 30 second registration timeout starting from
pressing the REG button. The handset has a 12 second
registration timeout starting from the registration or de-
registration option has been selected. The base and handset
will automatically exit registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

1. Up to nine handset groups (91-99) can be defined and
handsets can decide which group(s) they want to be
in.
2. For example, Group 1 represents the Customer
Service Group, Group 2 represents the Sales Group,
and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all
Sales and Marketing related calls. Then handset 11
will need to "subscribe" to Group 2 and Group 3.
3. Group Selections:
a. Press handset MENU-4 to enter the Call Settings
menu
b. Press number "2", handset enters group setting
menu.
c. Press OPTION soft key and followed by "1" key to
subscribe the group ("9＃＂, ＃:1~9). Enter 1~9.
d. Repeat for all desired groups.
e. Delete group selections by pressing
key and followed by "2" to Unsubscribe the group.
Notes:
1. The handset can change group affiliations at any time.
OPTION soft
~38~