Intermec EasyLAN 100e Mode D'emploi page 7

To download the IP address using a UNIX host
• Type the following:
arp -s host_name nn:nn:nn:nn:nn:nn temp
ping host_name
where:
host_name
The default name is
is the last six digits of the MAC address.
nnnnnn
The full MAC address for the Adapter is
nn:nn:nn:nn:nn:nn
The host will return
message. This message indicates that the address has been set and
communication established.
The ARP command can vary between different UNIX systems.
Berkeley System Distribution (BSD) type systems expect the host
name and node address in reverse order. Furthermore, IBM
®
AIX systems require the additional argument ether.
Managing and Configuring Advanced Features
Use your web browser to manage or configure more advanced
parameters on the Adapter.
• Open your web browser.
• Type in the Adapter's IP address (printed on the test label; see
"To print a test label" on page 6).
For more help, refer to the EasyLAN 100e Ethernet Adapter User's
Guide.
is the name mapped to the Adapter's IP address.
INTERMEC_nnnnnn, and
.
INTERMEC_0B766F is alive
or a similar
7