Ash Lip Removal / Installation; Logo Placement - Napoleon S20-1 Manuel D'installation Et D'opération

4.6

ash lip removal / installation

WARNING
!
• To avoid injury or damage, do not lift or carry the appliance using the ash lip.
note:
The ash lip comes factory-installed.
Remove the 2 screws securing the ash lip to the appliance.
A.
Set screws and ash lip aside.
B.
Reverse these steps to install the ash lip.
C.
4.7

logo placement

Remove the backing of the logo supplied and place, as illustrated.
Ash Lip
1/2"(13mm)
1/2"(13mm)
finishing
INSERT
IMAGE
HERE
45.5
W415-2796 / D / 05.07.21
EN
23