FAR RI218616A+HO Manuel D'utilisation page 33

ENGLISH
2. Slowly and carefully push the appliance into
the cabinet. Ensure the opening side is as
close to the cabinet wall as possible.
3. Screw a guide to holes in the side of
appliance door with short screws. Insert the
slider into the guide, then fully open and
close appliance door and wooden door to
check whether wooden door can close totally
and smoothly.
4. Open appliance door and wooden door
together and mark the position of slider
when the slider can function well at all angle
during door closes or opens. Take slider out
of guide and fix slider with wooden door by
GB-20
two short screws. Then fix slider cover onto
the slid.
5. Unscrew the guide from appliance door.
Repeat step 2 to 5 to fix another slider and
cover Fit two guides with sliders and fix
them with short screws. Then fix guide covers
with guides.
6. Double check the door can close and open
smoothly and appliance is sealed well. If
not, slightly adjust the unit. Then fix bottom
bracket with wooden cabinet by two long
screws.
ENGLISH
GB-21