The Safety Systems; Running Maintenance; Cleaning The Waste Filters - Brandt VI 310 Guide D'utilisation

The safety systems

Présentation de votre lave-vaisselle
Door poorly closed:
The light for the selected
programme flashes.
Keypad locking:
While the programme is running, the system automatically
protects the keypad from being used. The keypad unlocks
automatically when the programme finishes or if the
programme is cancelled.
Level:
The light illuminates when the reservoir is
empty.
Filter cleaning warning:
Approximately once a month, your
machine will advise you to service the
filters (see the following page).
44
Regenerating Rinse aid
Salt
GB

Running maintenance

Présentation de votre lave-vaisselle

Cleaning the waste filters

The filtration system consists
of several components:
A – The two-part waste filter
B – The main filter
C – The micro-filter
➀ ➀
Before removing the filters, remove any
waste from the main filter with a spon-
ge to avoid the waste blocking the
sprinkling arms.
➁ ➁
Unscrew the waste filter a quarter turn
and remove it.
③ ③
Remove the main filter
④ ④
Remove the micro-filter.
A - Two-part waste filters.
⑤ ⑤
Carefully clean all the filters
under running water.
To re-inset the filters
Follow the above instructions in
reverse.
Important: Do not
forget to lock the
waste filter by turning it a
quarter turn.
GB
The filters are located in the mid-
dle of the tub and must be
cleaned regularly to ensure opti-
mum washing results.
A
B
C
C
45