IMEON ENERGY 3.6 Manuel D'installation page 70

Insulate the cable on a length « L » of 6 to
7,5mm
FR
FR
EN
ES
Visually check the crimp
Step 5: Connect each input to the corresponding mounted connector of the inverter.
Connect negative pole (-) of connection cable to negative pole (-) of PV input connector.
Connect positive pole (+) of connection cable to positive pole (+) of PV input connector.
IMEON 3.6 (1 input)
70
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
IMEON INVERTER
Insert the striped cable on the crimping tool, then
press
Insert the crimped-on contact into the insulator of
the male or female coupler until it clicks into place.
Pull gently on the lead to check that the metal part
is correctly engaged.
IMEON 9.12 (2 inputs)
PV1 Input PV2 Input