Coby Snapp CAM4505 Série Manuel D'instruction page 39

Option
Set the default USB mode when the
USB
camcorder is connected to a computer.
• MSDC: USB disk mode. Use this
mode to transfer/manage files on the
camcorder.
• PCCAM: Web cam mode. Use the
camcorder as a web cam (requires
web cam driver installation).
• Charge: USB charge mode. Use this
mode to charge/power the camcorder.
Note: You can change between USB
modes by pressing
Video Out Set the video out format.
• TV System: Change between NTSC
and PAL formats. The standard video
system used in North America is
NTSC.
• Refresh Rate: Change between 50Hz
and 60Hz. The standard refresh rate
used in North America is 60Hz.
Setting The System Options
Description
.
Option
Reinitialize the internal memory or
Format
memory card.
• If a memory card is installed, the
memory card will be formatted.
• If there is no memory card, the
camcorder's internal memory will be
formatted.
FORMATTING WILL ERASE AND
DESTROY ALL FILES/DATA. Make a
backup copy of all your video and photo
files before using this feature.
Return all of the camcorder's options to
Reset All
their factory-default state.
Description
Page 39