Getting Started; Inserting A Memory Card - Coby Snapp CAM4505 Série Manuel D'instruction

Getting Started

Â
Please read and complete the following steps to begin using your digital video camcorder.

Inserting a Memory Card

Use an SD/SDHC
memory card to
expand your digital
video camera's avail-
able memory. The
CAM4505 can accom-
modate memory cards
of up to 16GB. Install a
memory card by insert-
ing it gently into the SD
card slot on the leftside
of the video camera.
To remove the memory card, press it further into
the card slot and then release. The card should
automatically eject from the slot. Grasp it by the
edge and pull gently to fully remove.
Page 16
To avoid data corruption, turn off the
digital video camera before inserting or
removing a memory card.
Do not attempt to place any object
other than an SD memory card into
the SD card slot. A compatible memory
card should slide easily into the SD
card slot; if you encounter resistance,
do not attempt to force the card in.
For information on formatting a memory
card, please see the "Setting the System
Options" section of this manual.
Getting Started