Küchenprofi 1310612200 Mode D'emploi page 7

For the assembly please proceed in the reverse order:

Press the clips of the cutting sieve into the openings at the lower side of the container. Slide the complete
container with the cutting sieve into the lower part until it locks into place.

Slide the upper part into the lower part, hold the locking screw with one hand and lock in place the upper
part clockwise.
Tip
Did you forget to clean the Garlic Cutter or can it only be opened or turned with difficulty? No problem: Place
the Garlic Cutter until the locking screw for approximately 5 minutes in hot water. The garlic juice loses its
sticking property – you can easily dismantle the device for cleaning.
Attention!
As a basic principle the complete Garlic Cutter can be cleaned (dismantled) in the dishwasher. To avoid
„
that dishwater penetrates in the upper part, you should take care that the upper part is placed vertically
in the dishwasher. In case of water ingress you have to shake the liquid out.
The transparent perforated plate at the stamp (see
„
figure 3) is cleaned automatically and must not be
removed in any case. If not observed the device is
no longer functional.
wARRANTy
We cover this appliance with a warranty of 5 years from the date of purchase. Excluded from the warranty are
damages due to normal wear and tear, inappropriate use, misuse, improper operation, willful destruction, lack
of maintenance and cleaning, transport or accidents, as well as interference from unauthorized persons. In case
of a warranty claim please contact your dealer. Warranty claims cannot be processed unless your receipt/invoice
is included with the device.
Translations are made in good faith. We do not assume any liability for translation errors. Solely the original
German text remains binding.
Figure 3:
GB
7