Canvas 088-0742-6 Instructions De Montage page 6

10
MODEL NO. 088-0742-6
Step 9
H, E, I
Requires
1. Ensure the locking mechanism on side panel (H) is at the OPEN position as
the picture shows by using the wrench (HH).
2&3. Attach the lower base cover (E) with the base side panels (I) as the
picture shows.
4. Close the lower base covers (E) and ensure that they are fully closed.
3
2
E
I
Step 10
HH, D
Requires
1&2. Use the end side of wrench (HH) to lock all the 12 locks clockwise.
3. Assemble upper base cover (D) with the assembled base.
D
3
1 1
4
H
1
HH
2
Step 11
D, N, JJ , M, GG
Requires
Place the upper base (D) onto the footplate support arm (N). Put the small
base cover (JJ) onto the foot plate support arm (N). Insert the foot pedal (M)
into the foot plate support arm (N), securing by inserting M6x10 bolts (BB) and
tighten with the S5 hex key (GG) .
JJ
2
D
1
Step 12
II,L, C
Requires
1. Attach the light receiver (II) to the top of the umbrella pole by turning the light
receiver (II) clockwise until fully tightened.
2. Insert the umbrella sunshade (L) to the base tube (C).
3. Insert M6x10 bolt (BB) into the base tube (C), tighten using hex key (GG).
1
L
2
3 BB
GG
11
3
MM
4
GG
BB
4