Canvas 088-0742-6 Instructions De Montage page 5

8 MODEL NO. 088-0742-6
Step 5
J, I
Requires
Slide side panels (I) downward between corner connectors (J).
I
H
Step 6
G, C, A, B, P, Q, H
Requires
1. Assemble the two pieces of the support tube rim (G) together.
2. Put the assembled support tube rims (G) down the pole (C)
and connect it to the brackets (A and B).
3. Hook the base connector (P and Q) onto the
side panel (H) and lower bracket (A).
G
2
I
S
T
H
H
I
1
G
3
P
Q
Step 7
F
Requires
Place sand bag (F) into the umbrella base as the picture shows.
Step 8
F
Requires
1. Pull open the hook-and-loop pouch on the sand bag (F) and fill with sand. For
proper stability of your o set umbrella, the recommended minimum weight of
the sand to be placed into each sand bag is 110 lb (49.9 kg) for a total of
220 lb (99.8 kg).
2. After filling sand bags (F) with sand only, close the pouch and ensure
hook-and-loop strip is sealed.
3. Lock the two sections of the sand bags (F) together.
1
F
9
F
2