Led Lights - Wagan Tech Brite-Nite 3W Sport Guide D'utilisation

DC CHARgINg
Make sure the unit is turned off before charging.
1. Insert the DC charging plug into the charging jack located on the bottom
of the handle of the spotlight.
2. Plug the other end into the 12V cigarette socket of your vehicle.
3. The LED indicator light will illuminate to indicate that the spotlight is
charging.
4. The LED indicator light will go out when fully charged (about 9 hours).
Maintenance
Store and operate in a clean and dry environment. It is advisable to recharge
the spotlight after using, otherwise the battery life will be shortened. As with all
sealed lead-acid batteries, when storing, be sure to recharge the battery fully
every 1-2 months to prolong the life of the battery. DO NOT leave the spotlight
plugged in after the charging time or you will damage the internal battery. The
lifespan of the internal battery depends on how it is treated.
BATTERy
The battery is not intended to be removed from the spotlight by the user.

LED LIgHTS

The Brite-Nite 3W Sport uses bright LEDs that do not need changing. Do not
™
attempt to alter or change the LEDs.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation
User's Manual—Read before using this equipment
©2012 Wagan Corporation. All Rights Reserved
4