Assembly - Sonnenkonig BAGNO UNI Mode D'emploi

The button stands for the COMFORT mode. After its activation, the red diode
located in the lower corner of the heating cartridge lights up and the unit operates at
full power.
EN
The built-in temperature sensor protects against possible burns by not being able to
exceed the maximum radiator temperature of 60°C. The temperature of the radiator is
controlled by a temperature sensor.
The cartridge heater construction and the physical properties of the heating medium
mean that the lowest radiator tubes (mainly the two lowest ones) have a lower tempera-
ture than the rest of the radiator - this is quite normal.

3 Assembly

This device may only be mounted vertically!
1. Brackets are supplied for mounting the radiator. Fasten them to the wall using the
screws supplied. Then push the radiator into the wall brackets on the wall.
2. Connect the power cord to a normal household outlet.
Hana
29