ALFRA KFT 500 Notice D'utilisation page 17

Alfred Raith GmbH
2. Industriestraße 10
68766 Hockenheim
Tel.: 06205-3051-0
FAX: 06205-3051-150
Internet: www.alfra.de
E-mail info@alfra.de
We hereby declare that the design of this
conforms to the regulations of the EU Machines Directive as outlined in 91/368/EWG.
The applicable harmonised standards were
EN 292 Part 1, Safety of machines
EN 60204 Part 1, Electrical equipment of machines
Technical documentation is available.
The machine's operating instructions are enclosed.
Hockenheim, June 2005
Our wider edge milling and deburring range:
KFV
Art.-Nr. 25260
KFK 5
Art.-Nr. 25200
EU Declaration of Conformity
in accordance with the EU Machines Directive 89/392/EWG; Appendix 11a
Edge milling cutter Type KFT 500
KFH 150
Art.-Nr. 25100
KFK 20
Art.-Nr. 25220
AKF 45/8
Art.-Nr. 25850
Alfred Raith GmbH
2. Industriestraße 10
68766 Hockenheim
KFT 250
Art.-Nr. 25110
SKF 63-15
Art.-Nr. 25010
Tel. 06205-3051-0
FAX 06205-3051-150
Internet: www.alfra.de
E-Mail info@alfra.de
KFH 250
Art.-Nr. 25130 Art.-Nr. 25140
KSL
Art.-Nr. 25250 Art.-Nr. 25910
SKS-15 Auto
Art-Nr. 25950
KFT 500
UZ 20
17