Dimensional Drawings - Camille Bauer KINAX N702-INOX HART Mode D'emploi

5.8 Dimensional drawings

72
[2.834]
62
[2.44]
11
[0.433]
6. Mounting
All inclination transmitter can be mounted either directly
with 3 clamping brackets to the item being measured or with
a mounting plate with 4 cheese head screws M6. Please take
care that the installation position of the inclination transmitter
is perpendicular to the gravity of the earth. The inclination
transmitter are supplied standard with mounting plate but
without cheese head screws M6.
Mounting versions
Tk-Ø85 (4x90°)
[3.346]
80
[3.15]
C
C-C
Ø6,4
[0.252]
Ø11
[0.433]
• Avoid impacts or shocks on the hou-
sing.
• Do not deform housing.
• Do not open or mechanically modify the
device.
Drilling aund cut-out diagrams (for mounting transmitters)
Ø66,2
[2.606]
60,1
2.366
C
M6
13