Alecto BC-100 Guide De L'utilisateur page 20

DAY TIME SETUP (start of the day – white light):
Make sure to activate the "Day time ( )" display (
and hold the
Use the "+" and "-" buttons to set the correct hour. Press the
continue to the minute setting. The minute digits now start flashing. Use the
"+" and "-" buttons to set the correct minutes. Press the
your input. You may set the day time from 4am till 2:59pm.
display
WAKE-UP TIME SETUP (alarm clock):
While setting the Day time, wake-up signal of the alarm clock may be
activated. While the hour or minute digits are flashing, press the
button; the
alarm clock sounds you may turn it off by pressing any operating button,
otherwise the sound turns off automatically after 1 minute. When the key-
lock is activated, you can still turn off the alarm clock.
NIGHT TIME SETUP (start of the night – blue light):
Make sure the "Night time (
and hold the
Use the "+" and "-" buttons to set the correct hour. Press the
continue to the minute setting. The minute digits now start flashing. Use the
"+" and "-" buttons to set the correct minutes. Press the
your input. You may set the night time from 3pm to 3:59am.
display
button for 2 seconds until the hour display starts flashing.
Hour "+,-"
2
sec.
icon will appear. The wake-up signal is now active. When the
button for 2 seconds until the hour display starts flashing.
Hour "+,-"
2
sec.
)" display is activated (
- 20 -
). Press
see Display Setup
button to
button to confirm
Min "+,-"
see Display Setup
button to
button to confirm
Min "+,-"
). Press