Timed Events - Videotec SM328A Manuel D'instructions

8.3.15

Timed events

When the "Use timed events" CheckBox is clicked on, it is possible to define timed events for keyboards,
relays and alarm contacts. We will describe the configuration of just those events for the keyboard in this
guide as the other two cases are identical.
Keyboard
selection
ComboBox
figure 21: Timed events
The keyboard to which a timed event is assigned is chosen by clicking on the arrow of the "Keyboards"
ComboBox.
To define an event
1. Click on the arrow of the "Action" ComboBox and select the type of action required;
2. Click on the arrow of the "Period" ComboBox and select the desired period.
3. Input the time at which the event takes place in the "Time" field;
4. Click on the "add" key.
5. Return to point 1. (It is possible to define more than one event for each keyboard.)
To edit an event, select the event to be edited, perform the operations described in the previous points
1,2,3 and then click on the "Edit" key.
To cancel an event, select the event and click on the "Delete" key.
Click on the "<< Back" button to return to the previous screen.
Click on the ">> Next" button to continue.
•
8. Configuration software
Click to define
timed events for
keyboard
Time setting
field
Event addition
button
Event modification
button
Event deletion
button
Click to define
timed events for
alarm contacts
Action choise
ComboBox
Period choice
ComboBox
Page 63/66
Click to define
timed events for
relay
MNVCSM328A_1511_EN
Event selected