Care And Maintenance; Technical Specifications - Perel CSOLMF Mode D'emploi

Working Mode – Constant Lighting Mode
Keep the mode button pressed for 3 seconds to switch on the
appliance. The motion detector and light sensor are disabled. The
appliance will automatically switch off and switch to sensor mode
with insufficient battery power.

6. Care and Maintenance

Dirty solar panels may not fully charge the battery. This can lead
to premature aging if the battery and may result in unreliable
operation.
Occasionally wipe with a damp cloth to keep it looking new. Do
not use harsh chemicals, cleaning solvents or strong detergents.

7. Technical Specifications

power consumption .......................................................... 5 W
battery type ................................ Li-Ion 18650, 3.7 V, 3000 mA
material .................................................................. ABS + PC
charging time ................................................................... 6 h
LED type................................................................. SMD2835
light temperature ......................................................... 4000 K
luminous flux .............................................................. 500 lm
PIR sensor
CRI ...........................................................................> 80 Ra
IP rating ........................................................................ IP65
working temperature ...................................... -20 °C to +50 °C
dimensions ............................................... 217 x 149 x 34 mm
weight ..................................................................................
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For
V. 01 – 02/04/2019
detection area ......................................................... ± 6 m
detection angle .......................................................... 120°
CSOLMF
7 ©Velleman nv