Fritel CO 2980 Mode D'emploi page 21

11. Press I/O (ON/OFF) when finished.
Remark: if the appliance isn't turned off manually, it will automatically go to standyby mode after 30
min.
2)
Hot Water
1. Plug the plug in the socket and open the lid of the water reservoir.
2. Fill the reservoir, with the carafe, never fill above the MAX indication. (1,4L)
3. Close the lid.
4. Press I/O (
symbol
The water is kept hot for 2 hours, after what the appliance shuts off automatically.
Press your cup, bowl or jar against the hot water dispense pusher to get hot water.
CAREFUL! By pressing the hot water dispense pusher hot water is released (burning
danger). Always use a heat resistant reservoir (cup, bowl, jug...), preferably with grip.
5. SETTINGS
1) Set time
1. To set actual time:
a.
b.
2) Program coffee
1. To set start time:
a.
b.
2. Once the desired start time is displayed: let go of the PROG button and the actual time is displayed.
3. Press PROG to make the appliance start on the programmed time. The PROG button will light up
green when the program is set. To cancel the program, press the PROG again.
) to heat up the water. The button will illuminate blue, the hot water
ON/OFF
will be displayed. When the water is at temperature, the light will turn green.
Press 00:-- (hour) till you reach the correct hours (AM/PM)
Press --:00 (minute) till you reach the correct minutes.
Press PROG (program) of the coffee display
(time on display starts to flash)
Once the time flashes: Press simultaneously on PROG and on 00:-- or --:00 till the desired
start time is displayed.
21