Start Using Your Digital Film Scanner - Reflecta x10-Scan Mode D'emploi

3. Start Using Your Digital Film Scanner

1. Insert the SD Card into the scanner.
Insert the SD card into the SD Card Slot located at the
back of the scanner, make sure that the golden pins
on the card are facing downward. The card will be
locked automatically if it is inserted properly.
Note:
Only accept SD and SDHC card (Maximum 32 GB).
Card with XDHC class is not compatible.
2. Connect the electric power to your scanner.
Connect the micro USB cable terminal to the micro
USB Connector of the scanner. Do not force the
connection if the connector is in the wrong direction,
turn the direction to the opposite side and try again.
-7-
EN