Air System - Duscholux Whirlpool CPL5 Instructions De Service

CPL5 whirl functions (individual modes)

Air system

The air system massages the entire body by blowing air in using the floor jets.
• This button starts the air system.
• Touch once to start
• Touch again to activate interval mode.
• Touching again switches the floor system off.
• + and - are used to adjust the intensity of all floor jets to individually adjust the massaging effect.
• The status display shows the on / int. / off functions, and levels 1 to 10.
• The display then switches back to the water temperature.
Jet / air system
The jet system has an electronic solenoid valve which feeds the air into the jet system, in order to
intensify the Venturi effect.
• This button starts the jet system.
• Touch once: Start. The status display shows 5, i.e. the jet pump starts at 50% power.
• Touching again switches the jet system into interval mode. • Use + and - to adjust the massaging
effect individually.
• The complete jet system is divided up into 10 output levels. Level 10 = 100%. Beginning with level 6,
the electronic solenoid valve opens automatically to intensify the Venturi effect.
• Touching again switches off the complete jet system.
• The status display shows the following functions: on / int. / off, and levels 1 to 10.
• The display then switches back to the water temperature.
If both systems are in interval mode, they synchronise themselves automatically.
Every keystroke is confirmed acoustically
Every keystroke is confirmed acoustically
11