Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury.
Electrical
1.
The machine should be placed near an electrical outlet so that the outlet is easily accessible.
Make sure the voltage meets the machine's electricity requirements.
2.
3.
Do not operate if the electrical plug or power cord is damaged.
4.
Do not under any circumstances alter the electric plug in anyway.
5.
To prevent the possibility of electrical shock, do not immerse the machine in water or permit liquid to
get inside the machine.
6.
To protect against electric shock, fire, or injury, ensure that the power cord is inserted properly into the
electrical outlet.
7.
Turn off the power when unattended or not in use.
Operating
1.
Do not allow foreign articles inside the machine.
2.
Do not attempt to laminate items that exceed total recommended material thickness.
3.
Do not insert pouch film with the back end first. (Front of film: sealed side, Back of film: open side)
This may cause the pouch to jam the rollers.
4.
Do not cut pouches before inserting them into the laminator. This will cause the laminator to jam.
5.
Do not laminate leaves, flower, clothes etc.
6.
When unplugging the unit, please grip the plug body not the supply cord.
7.
Do not place objects on the power cord and do not bend it excessively.
8.
Because the laminator creates heat, keep out of the reach of children. This machine should not be
used by children.
9.
When not using the machine for long periods of time, unplug the power cord from the outlet.
10. Do not operate the machine for any other purpose other than its intended use.
11. The LED ready light may take longer to turn on in lower room temperature environments, less than
64°F/17.8 °C.
12. This unit is recommended to be used in a normal room temperature environment.
(68°F-77°F / 20°C-25°C)
13. This unit is intended for indoor use in a dry environment only.
14. In case of any personal injury or product damage, place the equipment on a suitable, stable table only.
15. To protect against fire, ensure that the cover ventilation of the unit is not obstructed during operation.
WARNING
CAUTION
3
Publicité
Chapitres
Table des Matières
Dépannage
