Technical Data - PrimAster PMAKS 40 Manuel D'utilisation

PMAKS 20
ENGLISH
EN

TECHNICAL DATA

Cordless Chainsaw
No-load chain speed
Guide bar
Chain oil tank capacity
Battery voltage
Weight with battery
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745-2-13,
Uncertainty K = 1,5 m/s
Vibration emission value a
Vibration emission value a
Noise information
Measured according to
Sound pressure level L
Measured sound power level L
Recommended battery types
Recommended charger
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
36
2
Front handle
h
Rear handle
h
EN 60745; 2000/14/ EG+2005/88/EC
1) 2)
Uncertainty K = 3 dB (A)
1)
pA
Uncertainty K = 3 dB (A)
2)
WA
PMAKS 40
11 m/s
355mm/14"
180 ml
40 V
4,8 kg
< 2,5 m/s 2
75 dB (A)
92,8 dB (A)
Typ LI 25 / LBA40120 / LBA40240
CGA402 / CGA405