SATA air vision 5000 System Mode D'emploi page 41

a lack of oxygen.
Incorrect use
Unintended use is the use of the breathing protection equipment in a sur-
rounding atmosphere featuring radiation, heat or dust.
4. Maintenance and Care
Spare parts are available for carrying out repairs.
The breathing protection apparatus serves to protect your health. Careful
handling together with constant maintenance and care of the components
is necessary to warrant this function.
Attention!
Damage from unsuitable cleaning agents
The breathing protection equipment can be damaged by the use of ag-
gressive cleaning products.
→ Do not use aggressive or abrasive cleaning agents. Use
SATA wet & dry cleaner (Art. No. 75358) for cleaning.
→ Incedur by the company Henkel can be used for disinfection.
Clean the breathing protection apparatus every time after it has been
used, also check that it functions properly and does not leak; disinfect the
breathing protection hood if necessary. New units and spare parts have a
shelf life of 5 years as long as they are stored in air-tight packaging.
5. Malfunctions
If it is not possible to remedy the malfunctions with the corrective action
described in the operating instructions for the individual components,
send the components to the SATA customer service department. (For
address see chapter 6).
6. After Sales Service
For accessories, spare parts and technical support, contact your SATA
Operating instructions SATA air vision 5000 system
EN
41