Optional Accessories - Makita CL183D Manuel D'instructions

Aspirateur sans fil
Masquer les pouces Voir aussi pour CL183D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Nozzle + Extension wand (Straight pipe) (Fig. 15)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for cleaning
a floor while standing erect.
Corner nozzle (Fig. 16)
Fit on the corner nozzle for cleaning corners and crevices
of a car or furniture.
Corner nozzle +Extension wand (Straight pipe)
(Fig. 17)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
Cleaning without nozzle (Fig. 18)
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off before
attempting to perform inspection or maintenance.
Things to Check Before Asking for Repairs
Symptom
Weak suction power
Not working
010051
NOTE:
• Do not attempt to repair cleaner by yourself.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
• Corner nozzle
• Round brush
• Flexible hose
• Filter
• Prefilter
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
8
Area to be investigated
• Is capsule full of dust?
• Is filter clogged?
• Is battery exhausted?
• Is battery exhausted?
Cleaning (Fig. 19)
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Wash the filter in soapy water when it is clogged with dust
and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried filter may
cause poor suction and shorten the service life of the
motor. (Fig. 20)
Do not blow dust sticking on the cleaner by air duster. It
brings dust into the housing and causes failure.
• Empty dust from capsule.
• Dust down or wash filter.
• Recharge battery.
• Recharge battery.
Fixing method

Publicité

Table des Matières
loading

Table des Matières