Factory Reset; Cleaning And Storage; Ordering Accessories - Philips DL8781 Mode D'emploi

Factory reset

Cleaning and storage

Ordering accessories

-
To select the correct user profile, step off the device and tap on the
measurement platform to confirm the correct user profile.
-
All profiles will be shown alternately on the display. Tap on the scale
to confirm yours.
-
Make sure that you select the correct user.
To add up to 8 new user profiles or delete all measurement results from the
device, you can perform a factory reset. With the factory reset the device is
cleared from all existing user profiles and measurement results.
1 With the device turned on, press and hold the measurement unit button
located on the bottom of the device for 20 seconds, until "FACt" is shown
on the display. Now all data is deleted.
- After resetting the scale will automatically turn off.
- You can now create new users profiles (see 'Pairing the body analysis
scale to your mobile device and create a user profile').
Caution: Never immerse the device in water and do not rinse it under
the tap.
1 Wipe the surface of the device with a cloth.
-
Use a dry cloth to wipe dust off the surface of the device.
-
Use a slightly damp cloth to wipe dirt off the surface of the device. Dry
the surface with a dry cloth after cleaning.
Caution: Do not use propellant, abrasive or other chemicals to wipe the
dirt in order to avoid discoloration or malfunction of the scale.
2 Store the device in a dry, dust-free place away from direct sunlight or
other heat sources. Avoid surroundings with fluctuating temperatures
(see Specifications').
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care
Centre in your country (see the worldwide guarantee leaflet for contact
details).
English
15