Programming The User Code - Wittkopp BASIC Manuel D'utilisation

2. Master and user code
2.1 Changing the master or user code
After entering the new code, the electronic lock should be opened and locked several times with the safe
door opened.
Step
Press and hold the key '0' until the red LEDs flash permanently
1.
Enter code e.g. factory code 123456
2.
Enter your new 6-digit code e.g. 567891
3.
Re-enter your new 6-digit code e.g. 567891
4.

2.2 Programming the user code

The master is able to program the user code, but not vice versa.
Step
Press and hold the key '1' until the red LEDs flash permanently
1.
Enter your 6-digit master code e.g. 567891
2.
Enter the new 6-digit user code e.g. 111111
3.
Re-enter the new 6-digit user code e.g. 111111
4.
• A new user code will be allowed only if the code is differing in two places by a single digit from an existing
code.
2.3 deleting the user
The master is able to delete the user, but not vice versa.
Step
Press and hold the key '3' until the red LEDs flash permanently
1.
Enter your 6-digit master code e.g. 567891
2.
think safe
Action
Action
Action
Key
0
123456
567891
567891
Key
1
567891
111111
111111
Key
3
567891
13