OPEN AND FOLD THE SCOOTER
How to fold VELOCIPTOR ES 120EW
1.
Release the release lever located on the lower part of the handlebar sup-
port tube, pressing the release button and pulling the hook outwards;
2.
Fully open the release lever, bringing it to 90 ° with respect to the sup-
port tube;
3.
Guide the handlebar tube towards the rear wheel;
4.
The handlebar is equipped with a hook: then hook the handlebar onto
the special support, located on the rear mudguard;
5.
The scooter can now be transported by gripping the handlebar support
tube
How to open VELOCIPTOR ES 120EW
1.
With the scooter closed and the handlebar attached to the rear mu-
dguard, rele-ase the handlebar by acting on the hook located on the
handlebar itself;
2.
Lift the handlebar in a vertical position;
3.
Carefully close the locking lever, located on the lower part of the hand-
lebar support tube.
29