Publicité
Les langues disponibles
Les langues disponibles
PS2 (UK)
Input
230 V AC 50 Hz 40 mA
Output
24 V AC 100 mA AC
PS2 (EU - Euro 2 pin)
Input
230 V AC 50 Hz 40 mA
Output
24 V AC 100 mA AC
PS2 (Australian)
Input
230 V AC 50 Hz 40 mA
Output
24 V AC 100 mA AC
PS2 (UL - American)
Input
115 V AC 60 Hz 90 mA
Output
24 V AC 100 mA AC
PS2 (Korean)
Input
220 V AC 60 Hz 40 mA
Output
24 V AC 100 mA AC
PS2 (Japan)
Input
100 V AC 50/60 Hz 100 mA
Output
24 V AC 100 mA AC
Warning
Only use the supplied Rega PS2 mains adaptor with
this product.
ENGLISH
Introduction
Please follow this quick set-up guide to ensure optimum
performance and perfect operation. Failure to do so may
invalidate your warranty. For more information on this
product, please visit www.rega.co.uk.
Unpacking your turntable
Always keep the turntable flat.
Follow the packing guide printed inside the front of
the box.
Save the packaging in case you need to transport
your turntable in the future.
Place your turntable on a rigid level surface.
Ensure the drive belt is in place and remove the
transport hub card from beneath the sub platter.
Carefully place the platter on the hub and fit the
turntable mat.
Turntable contents
1.
Platter
2.
Drive belt / pulley (underneath platter)
3.
Tonearm
4.
Balance weight
5.
Plinth
6.
Power input (underside of the turntable)
7.
Phono output (rear of the tonearm)
8.
On / off switch (underneath plinth)
1
Publicité
