Connections - Viscount Accupipe CM-100 Mode D'emploi

VISCOUNT
CM-100 Pipe Organ Module

1.3 Connections

1.3 Connections
Connect the power supply lead supplied with the instrument to the CM-100's A.C. input connector (rear
panel). Then connect the other end of the lead to the mains plug.
Now connect the Loudspeaker boxes (or the amplification system) to the OUTPUTS connectors on the
CM100's rear panel.
If you have two diffusers (system recommended minimum) connect them to outputs 1 (left diffuser) and
2 (right diffuser). If you have more than two loudspeaker boxes, read the next point carefully.
If you wish to listen to the instrument using headphones, connect them to the Phones output provided.
Remember that connecting the headphones does not cut out any diffusers connected.
Now use a MIDI cable to connect the MIDI OUT connector of your organ (or keyboard) to the CM 100's
MIDI IN connector.
Page 6