Viscount Accupipe CM-100 Mode D'emploi page 29

VISCOUNT
CM-100
o VOICES MEMORY keys (from 1 to 8). Press these keys for easy recall of 8 stop (voice) setups saved
earlier by the user. The CM-100 offers a total of 64 memories divided into 8 banks of 8 memories
each. For more information about use of the voice memories, see chapter 4.
o CANCEL key. "Clear" button: press this key to switch off all the voices which may be on.
o WHOLE / SPLIT key. Sets the sound module's operating mode. When the key LED is off, the CM100
is set in WHOLE mode, in which all the voices respond to the same MIDI channel (single manual
mode). Press the key to switch on the LED and activate SPLIT (multi-manual) mode, in which the
instrument is able to respond to more than one MIDI channel, each channel associated to one or more
voices. Press the key again to switch off the LED and revert to whole mode. See chapter 3 for more
informations.
o TREMULANT key: activates (LED on) and deactivates the tremulant effect.
o VOICE REGISTERS (1 to 12) . Press these keys to switch the single voice on (press the lower part)
or off (by pressing the upper part). Note that, as CM-100 is a fully programmable device, the voices
installed (and therefore the labels of the keys) may change.
Page 4
Pipe Organ Module