Intercom Function; Date And Time Setting - PROEM MDC-2F4 Manuel Utilisateur

Monitor MDC-2F4
English

05 - Intercom function

When the monitor is in standby mode, press
CALL Button to enter Intercom Function
page(or select Intercom item on main menu
page). Use ▲ / ▼ Button to move upward /
downward to select the item you want, press
MENU Button to enter.
1. Intercom Call: User in one apartment can
call other apartments in the system. the
namelist will be created automatically by
the system. Selete a name on the screen
then press MENU button or CALL Button to
dial.(Note:1. Press "MENU or CALL " button
again to redial. - 2. Press "TALK" button to
cancel the call. - 3.The DIP switches code
of each monitor must set different.)
2. Inner Call: If multi Monitors are installed
in the same apartment, select Inner Call, all the other Monitors will ring at
the same time, whichever Monitor answers the call, conversation is started.
and the other monitors will stop ringing at the same time.(note:the DIP
switches setting of all monitors must be same. )
3. Direct Dial Guard unit: A Monitor can be assigned as Guard Unit Monitor;
when the Guard Unit Monitor answers the call, conversation with the guard
person is started..
06 - Basic setup instructions
Ring Tone Settings
Select User Setup item on main menu page to enter setup page.Select Door
Station Call Tone, Inercom Call Tone or DoorBell Tone item, There are 12 pieces
ring tones can be selected.use /
MENU button to save and exit.
- - 4 4 - -
Intercom
Intercom Call ...
Inner Call ...
Direct Call Guard Unit ...
Exit OK Select Item
Intercom Call
[ 00 ] Jim. Zhang
[ 01 ] Calo. Liu
[ 02 ] Jacko. Zhang
[ 03 ] Philips. Chen
[ 04 ] Hebe. Zhang
[ 05 ] Tony. Li
Exit Calling Next Page
Button to select last/next ring tone, press
Door Station Call Tone :set the ring tone calling from outdoor station.
Intercom Tone :set the ring tone calling from other apartments.
DoorBell tone :set the ring tone calling from door bell.
User Setup (1)
Door Station Call Tone ...
Intercom Call Tone ...
DoorBell Tone ...
Clock ...
Next Page
Exit OK Select Item

07 - Date and time setting

Select User Setup item on main menu page
to enter setup page,then use ▲ / ▼button
to select Clock... item. Input date and time
by pressing ▲ / ▼ Button to increase /
decrease the value; use / Button to
select last/next digital. After finish, press
MENU Button to confirm and return last
page.
08 Monitor time setting
Select Manual Monitor item on main menu
page, then select Monitor Time Set... item.
Use ▲ / ▼ Button to increase / decrease the
value; After finish, press MENU Button to
confi rm and return last page.
Door Station Call Tone
Selected: 06
1 Carmen 5 Sonatine 9 Do Re Me
2 Ding Dong 6 Edelweiss 10 Happy Birthday
3 Rain 7 Going Home 11 Jingle Bells
4 For Alice 8 Congratulation 12 Telephone Ring
Cancel Save&Exit Last/Next
Clock
2010 - 12 - 20 17:17
Digital Adjust OK Digital Select
Monitor Time Select
Current : 01min
Cancel Save&Exit Last/Next
- - 5 5 - -