dji SPARK C2 Guide De L'utilisateur page 4

Disclaimer
Congratulations on purchasing your new DJI
document affects your safety and legal rights and responsibilities. Read this
entire document carefully to ensure proper configuration before use. Failure to
read and follow instructions and warnings in this document may result in serious
injury to yourself or others, damage to your DJI product, or damage to other
objects in the vicinity. This document and all other collateral documents are
subject to change at the sole discretion of DJI. For the latest product information,
please go to http://www.dji.com and visit the official page for this product.
By using this product, you hereby signify that you have read this disclaimer and
warning carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own conduct
while using this product, and for any consequences thereof. You agree to use this
product only for purposes that are proper and in accordance with all applicable
laws, rules, and regulations, and all terms, precautions, practices, policies and
guidelines DJI has made and may make available. Users shall observe safe and
lawful practices including, but not limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable national legislation
are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and
its affiliated companies. Names of products, brands, etc. appearing in this document
are trademarks or registered trademarks of their respective owner companies. This
product and document are copyrighted by DJI with all rights reserved. No part of
this product or document shall be reproduced in any form without the prior written
consent or authorization of DJI.
Warning
1. Always ensure the remote controller is fully charged before each flight.
2. If the remote controller is powered on and has NOT been used for 5 minutes,
it will sound an alert. After 6 minutes it will automatically power off. Move the
sticks or perform some other action to cancel the alert.
3. Adjust the mobile device clamps to allow a firm grip on your mobile device.
4. Ensure the antennas of the remote controller are unfolded and adjusted to the
proper position to achieve optimal transmission quality.
5. Repair or replace the remote controller if damaged. A damaged remote
controller antenna will greatly decrease performance.
6. Fully charge the battery at least once every three months to maintain battery
health.
Introduction
SPARK remote controller features a brand new, amplified Wi-Fi signal
TM
transmission system, capable of controlling the aircraft* and the gimbal camera
at a maximum transmission range of 1.2 mi (2 km)**. The remote controller can
connect to a mobile device wirelessly and display a live video feed via the DJI
GO 4 app. The folding clamps allow you to secure your mobile device. Maximum
TM
remote controller battery life is approximately 2.5 hours**.
2
TM product. The information in this