Technical Specifications; Disposal; Guarantee - Altrad ATIKA HSC 60-400 Mode D'emploi

Type / Model
year of construction
Idle speed n
0
Number of strokes when idling
Cutting length
Cutting distance
Weight (without battery):
Hand arm vibration *
Measuring uncertainty K *
Measured sound power level L
Guaranteed sound power level L
Sound levels L **
pA
Measuring uncertainty K
pA
Compatible battery voltage
*
(according to EN 60745-2-15)
**
(according to regulation 2000/14/EG)

Refer to the respective "Operating instructions" for "Technical specifications" of the batteries and the charger.
Dispose of hedge shears, battery, charger, accessories and packaging in an environmentally friendly manner according to
regulations.
For EU countries only.
Electrical devices do not go into the domestic rubbish.
According to the European Directive 2012/19/EC on electrical and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility for an environmentally compatible recycling.

For information on "Disposal" of the battery and charger, please refer to the respective "Operating Instructions".
Please note the attached guarantee declaration.

Technical specifications

**
wA
**
WA
**

Disposal

Guarantee

HSC 40-600
see last page
1500 min
–1
3000 Cuts per min.
585 mm
27 mm
ca. 3,2 kg
a <2,5 m/s²
h
1.5 m/s²
103,2 dB (A)
104 dB (A)
90 dB (A)
3,0 dB (A)
36 V (max. 40 V)
Technical modifications reserved!
21