BH SHIATSU S100 Instructions De Montage Et Utilisation page 29

NOTE: Before fastening the bottom front buckles on the left and right side panels, first fit the leg warmer
panel step (5), Fig.7.
D.2.3 Plug the heater cables Fig.8, into the sockets on the rear panel as shown in Figs.9-10.
Make sure connection is secure.
Fig.8
- Once the internal seat cables have been connected, fit the seat panel step (6), Figs.12-13.
- Next fit the front door panel, step (8) Fig.14 and fasten it with the buckles.
Fig.7
Fig.9
Fig.12
Fig.14
29
Fig.10
Fig.13
Fig.11