Software & Download; Pc-Cam Driver Installation - Ingo HEC050N Manuel D'utilisation

Select "PC Camera" mode when you use this camera as a PC camera.
Select "Mass Storage" mode when you download, delete or upload file, it
can also be used as a removable disk.
a) Power on and press the "MENU" button to enter "Setup";
b) Press the UP or DOWN button
c) Press RIGHT button
d) Press UP or DOWN button
e) Press the OK button to confirm and press MENU button to exit.
K: Firmware version
a) Power on and press the "MENU" button to enter "Setup";
b) Press the UP or DOWN button
c) Press the RIGHT button
and updated date.
d) Press OK button to exit.
II. Software & Download
1.

PC-CAM driver installation

Insert the CD into the CD-ROM of your PC, An interface appears as follows,
Click the "Install Camera Driver" to install the camera driver.
to select "USB Mode";
for options: "mass storage" or "PC camera".
to select;
to select "Firmware version";
to enter, it will show the firmware version
15
English