Ingo HEC050N Manuel D'utilisation page 17

a) Power on and press the "MENU" button to select "Setup" mode;
b) Press the UP or DOWN button
button to select "Enable" or "Disable", and then press the OK button to
confirm.
c) Press the MENU button to exit.
H: Format
a) Power on and press the "MENU" button to select "Setup" mode;
b) Press the UP or DOWN button
c) Press the RIGHT button
memory or SD card.
d) Press the OK button to confirm and press the MENU button to exit.
Attention: All the saved files will disappear if you format the memory.
I: Default setting
a) Power on and press the "MENU" button to select "Setup";
b) Press the UP or DOWN button
c) Press the RIGHT button
d) Press the UP or DOWN button to select "load" to back to the default
setting.
e) Press the OK button to confirm.
f) Press MENU button to exit.
J: USB Mode
to select "Buzzer"; press the right
to select "Format";
to select "Yes" to format the camera internal
select "Default setting";
for 2 options: "Load", "NO",
14
English