Ingo HEC050N Manuel D'utilisation page 12

d): Press the SHUTTER button again to stop recording.
6.2 Delete audio files
See page 4 for detail set up
6.3. Play video /audio file on TV
You can play video/audio file on TV by connecting the AV cable：
a): Power on TV and switch to AV mode;
b): Power on the camera and connect it to TV by the AV cable;
c): Press the MODE button to enter the PLAYBACK mode;
d): Press LEFT or RIGHT button
SHUTTER button to play and press it again to end the playing.
e): Press the OK button to pause and press it again to continue.
Attention:
● The camera screen will automatically off when the cable is connected to
the camera;
● The battery will also be used when the camera connected to TV;
● The TV system may affect the image quality, please adjust the camera
system PAL or NTSC to comply with the TV system(see page 16);
● Please adjust the TV setting if the image does not display at the center
of TV screen; this is not the failure of the camera.
● Please use the cable attached to connect with the camera and TV.
to select the file. Press the
9
English