GB
PREPARATION
1. Slide the controller's battery compartment cover towards the direction shown and
open it. Insert 4X"AA" batteries with the correct polarity, then cover it again.
CHARGE
Charging interface
Charging plug
A. Controller charging
Take the plug out of the controller and connect it to the charging port the car. It will take you
about 40 minutes. When charging, the charging light is on. Finish the charging process, the light
goes off.
Mark: put the controller power off when charging.
B. Charging via USB
Insert the USB line to computer, and the light will be bright;
Insert the wire into the charge port, and the light turn off. After charging for about 1 hour, the light
is bright, which mean the charging is done.
14