Use And Control Before Use / Starting The Appliance / Temperature Control / Internal Parts - De Dietrich DRS 922 JE Guide D'installation & D'utilisation

Use and Control
Before Use
Wait two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
• Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
• Remove safety elements used for transportation.
Starting the appliance
• Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position «O»
(OFF).
• Turn the thermostat control to the required setting.
D338
• For better use of space, the front half-shelves can
lie over the rear ones.
The glass shelf above the vegetable drawers
and the bottle shelf should always remain in
position, to ensure correct air circulation.
Temperature Control
• The thermostat control situated inside the fridge
compartment regulates the temperature of the
appliance.
• It allows you to adjust the temperature inside the
refrigerator according to use and external
conditions.
• Setting „1" = hightest temperature, warmest
setting
• Setting „6" = lowest temperature, coldest
setting.
• Setting „0" = Off
A medium setting is generally the most suitable.
Internal Parts
Storage shelves
• The shelves can be removed for cleaning.
• To permit storage of food packages of various
sizes, the shelves can be placed at different
heights.
• To remove the internal shelf pull forward until it can
be tipped up or down and removed.
• Please do the same in reverse to insert the shelf at
a different height.
Variable door interior
• To permit storage of food packages of various
sizes, the central door shelf can be adjusted in
height.
• Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
P R X X X
• For more thorough cleaning, the top and bottom
door sheves can be removed by pulling them in the
direction of the arrows, then refitting them in
position.
17