Driver Installation; Software Installation - Saitek Yoke System Guide D'utilisation

mixture or prop pitch and you can also buy additional quadrants to
link together for more complex multi-engined aeroplane configurations.
Use the integrated USB Hub on the side of the Pro Flight Yoke to easily
connect other parts of the Saitek Pro Flight range of products, such as
additional Pro Flight ThrottleQuadrants, Pro Flight Rudder Pedals or
other peripherals.
INSTALLATION FOR WINDOWS® 8, 8.1, 7, AND VISTA. INCLUDES ALL 32- AND 64-BIT VERSIONS
IMPORTANT: PLEASE INSTALL DRIVERS BEFORE INSTALLING SOFTWARE

DRIVER INSTALLATION

1. Visit Saitek.com to download the latest drivers and software for your operating system.
2. With device disconnected,
3. At the Driver Setup screen,
computer's USB ports, then click
4. At the Driver Setup screen, click
5. When the Saitek Controller screen appears, test the controls to verify device operation.
After the test, click

SOFTWARE INSTALLATION

1. In the Software Setup screen, click
software from Saitek." Click
2. After installation, you have the option to
programming environment. To skip the Profile Editor now, uncheck the box and click
Finish
to complete installation.
follow the onscreen instructions to complete the installation.
only when prompted,
Next.
Next
to test your controller.
OK.
Next
yes,
then click
insert USB cable into one of your
and a pop-up box will ask if you "want to trust
Next.
Run Profile Editor,
7
which will show you the