Important User Information; Product Range; Accessories And Spare Parts - Peltor TacticalPro MT15H7 Série Mode D'emploi

IMPORTANT USER INFORMATION

The headset must be put on, adjusted, cleaned and maintained in accordance with these instructions.
• Wear the headset 100% of the time you spend in noisy environments for full protection.
100% use of a working hearing protector is the only sure protection from hearing loss.
If you spend time in environments with more than 85 dB A-weighted noise, you need to protect your hearing, or the
hearing receptors deep in your ears may be irreparably damaged. If you remove the protectors for even a tiny portion
of the time you spend in noisy situations, you are in the danger zone. A comfortable hearing protector designed for the
specific noise level in which it is used is the best guarantee that you will wear the hearing protector 100% of the time,
thereby ensuring protection from permanent hearing loss.
• Clean the outside of the headset regularly with soap and warm water.
Note: Do not immerse in fluids.
• Do not store the headset in temperatures exceeding +55 °C, for example in a windscreen or window.
• The headset, particularly the ear cushions, can degenerate over time and should be inspected regularly to ensure that
there are no cracks and sound leakage.
• Certain chemical substances may be harmful to this product. Contact Peltor for more information.
Note: If these instructions are not followed, attenuation and other functions can be impaired.

PRODUCT RANGE

Standard
With headband MT15H7A
With neckband MT15H7B
With helmet attachment MT15H7P3* 405 g
TECHNICAL DATA
(F) Attenuation values: The Peltor Tactical Pro meets the requirements of EMC directive 89/336/EEC. The (F) tables
show 1) frequency in Hz, 2) attenuation in dB (average), 3) standard deviation in dB. Tested according to ISO 4869-1.
Certified by FIOH, Topeliuksenkatu 41, FI-00250 Helsinki, Finland ID#0403.
The attenuation values and noise levels for the headset are tested and approved according to pr EN 352-4.
Noise level limit: Max. 82 dBA equivalent noise level.
(G) Noise level relationship: Diagram (G) shows the relationship between the A-weighted sound pressure level outside
and inside the cup. Tested according to lSO 4869-4.
(H) Input signal level/usage time: Diagram (H) shows the maximum permitted audio signal in relation to usage time. To
prevent harmful noise levels in the earphones, the average volume level on the electronic input signal in the audio input
must not exceed the values in this diagram.
Battery type: 2 x 1.5 V AA (LR6) batteries
Operating time: About 1000 hours between battery replacements.

ACCESSORIES AND SPARE PARTS

Hygiene kit – HY79
Easy to replace hygiene kit consisting of two attenuation cushions and snap-in ear cushions. Replace at least twice a
year to ensure constant attenuation, hygiene and comfort.
Clean – single-use protectors – HY100A
Hygienic single-use protector that is easy to apply to the ear cushions.
Packages of 100 pairs.
CONNECTOR CORDS
FL6H 3.5 mm mono connector
FL6M 2.5 mm mono connector
FL6N 3.5 mm stereo connector for Micman com radio
Connector cords of cold and wear-resistant polyurethane for connection to a com radio etc. Length 110 cm.
WIND PROTECTION – M60/2
Wind protection for the microphones. Packages of 1 pair.
Weight Headset model Weight
370 g MT15H7A-07
355 g MT15H7P3*-07 405 g
3
370 g