Product Set-Up - D-Link DCS-5230 Guide D'installation

PRODUCT
SET-UP
CD SET-UP WIZARD
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure DCS-5230 using a static IP, connect your DCS-5230 directly to your computer's
ethernet port using the ethernet cable provided. Ensure that your computer is also set to a static IP
of address of type 192.168.0.x. Then connect the power cable on the DCS-5230. The DCS-5230
power light will display as solid red first, then shortly turn to green.
Then simply open a browser window and enter the IP address in the browser address field:
DCS-5230
SET-UP WIZARD CD
The CD contains all of the instructions required to set-up DCS-5230
INSERT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DCS-5230 yet)
SET-UP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DCS-5230
IP ADDRESS: http://192.168.0.20
USERNAME: admin
PASSWORD:
3