Caring for your Dryer
When finished
After each load
Every Week
Cleaning
Do not use
Lubrication
Your Tumble Dryer needs very little attention. The following simple
steps will keep it performing well.
Turn the dryer off.
Always clean the filter.
Turn the dryer by hand to check that small items like handkerchiefs do
not get missed.
Wipe the drum and seal with a damp cloth.
Lint Filter
Occasionally clean the surface of the stainless steel sensor inside the
drum with vinegar to remove water residues. Apply carefully with a
cloth. This will maintain the drying performance of the dryer. The
sensor is located between the vanes of the drum, towards the front of
the dryer. Rotate the drum if necessary to locate it.
Every 6 months vacuum the front air intake grille and vents at the rear
of the dryer, to remove the build up of lint or dust.
To remove accumulation of lint from the door, exhaust duct and filter
areas, clean occasionally with a vacuum cleaner.
Abrasive cleaners, scouring agents, acids, chlorine bleach or metal
polish to clean any part of the machine. These could damage the
machine
Your tumble dryer uses special bearing components. Lubrication by
the user is not necessary and must not be attempted.
We strongly recommend that all appliances are checked regularly for
electrical and mechanical safety.
Sensor
Exhaust Duct
15