Onda OVS Notice D'utilisation page 15

7- Put the filter in the oil separator and screw it in down.
.
• Test all the connections.
•
Purge completely the air from the Oil Separator during the filling.
•
Before use, verify the compatibility of oil with the material of construction of Oil Separator.
For a correct use :
DO NOT EXCEED THE MAXIMUM ALLOWABLE PRESSURE (PS)
AND TEMPERATURE (TS) LIMITS WRITTEN ON THE PLATE
•
Do not expose the Oil Separator to any kind of excessive vibrations.
•
Avoid foreign particles entering into the pressure equipment.
•
Do not expose the Oil Separator to pressure or temperature fluctuations.
•
Do not expose the pressure equipment to cyclical constant or variable loads.
7. COMMISSIONING
8. USE
15