Safety Information; Proper Intended Use; Authorised Target Groups - Berbel Connect Manuel De Montage

Safety information

1. Safety information
1.1

Proper intended use

The device serves to integrate the
hood functions in a data network and
to pass on information between the
extractor hood, remote control and other
integrated devices.
These instructions describe the
connection and attachment with the
extractor hood.
 Observe the extractor hood
instructions for any peculiarities when
installing the device.
 For further information on the KNX
module: http://www.berbel.de/knx
It is only permitted to use the device
when it is in technically flawless
condition and after correct installation.
Any other use shall be considered
improper use.
The reading and observance of this
manual are also included in the proper
use of the device.
32
1.2

Authorised target groups

Electrical work only to be undertaken by
qualified electricians per DIN VDE 0100.
Requirements on qualified electricians:
y Knowledge of the basics of electrics.
y Knowledge of country-specific
regulations and standards (e.g. in
Germany, DIN VDE 0100, part 701).
y Knowledge of the applicable safety
regulations.
y Knowledge of the relevant legal
requirements for gas installations
(e.g. in Germany the technical rules
for gas installations TRGI).
y Knowledge of this manual.
Installation and repair only by qualified
specialist personnel. Requirements on
qualified specialist personnel:
y Knowledge of the regulations on
safety at work.
y Knowledge of fastening systems.
y Basic knowledge of ventilation
systems.
y Experienced in using electrical and
mechanical tools.
y Ability to read technical drawings.
y Knowledge of this manual.
6003850_0 – 01.12.2017