Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
3.5
Integrating the device in the
extractor hood system
☞ Ensure that the extractor hood is
installed and connected correctly.
Observe the extractor hood
instructions.
☞ Switch on the extractor hood.
After connecting the power supply, the
device is automatically connected with
the extractor hood.
With the following berbel Connect
variants, the device must be paired with
the extractor hood:
y berbel Connect - KNX
y berbel Connect - Home Connect
☞ Press the programming button KNX.
D "2.2 Product overview" (page 34).
For further information on the KNX
module: http://www.berbel.de/knx
40
6003850_0 – 01.12.2017
Publicité
Table des Matières
