Changing The Direction Of The - MicroFridge snackmate 3.3SM4R Manuel De L'utilisateur

Changing the Direction of the Door Opening (Swing)
Your refrigerator has a factory-installed left-hand door swing. To avoid personal injury to yourself and/or
property, we recommend someone assist you during the door reversal process.
Tools needed: No. 2 Phillips screwdriver
1. Remove the upper hinge pin from the right side of the door frame and
reinstall it on the left side of the door frame (the previous pin location)(See Fig.B)
2. Remove the plastic cap from the top right-hand side of the cabinet and reinstall on
the left side of the cabinet (the previous pin location) (See fig.C)
3. Remove the upper door hinge from the left-hand side of the cabinet and reinstall on
the right side of the cabinet (the previous pin location) (See fig.C)
4. Remove the three retaining screws on the bottom right side of the cabinet and reinstall the
fixed foot on the left side in the former lower hinge assembly screw positions, remove the
leveling leg and bottom hinge (See fig. A)
5. With the door closed, reinstall the lower hinge assembly on the right side of the refrigerator.(See fig. A)
6. Reinstall leveling leg. (See fig. A)
Fig.C
PLASTIC
CAPS
FACTORY INSTALLED DOOR HINGE
(LEFT-HAND DOOR SWING)
PLASTIC CAPS
REVERSED DOOR HINGE
(RIGHT-HAND DOOR SWING)
Fig.B
Fig.A
LEVELING LEG AND
BOTTOM HINGE
8
TOP HINGE
PIN
FIXED FOOT
AND RETAINING
SCREWS