Operation Control; Temperature Selection - MicroFridge snackmate 3.3SM4R Manuel De L'utilisateur

Operation Control

The temperature of the refrigerator is controlled by
setting thermostat knob to a desired setting.

Temperature Selection

To start the refrigerator, turn the temperature
control knob to the position corresponding to the
desired cooling (on the graduated blue dial )
Fig A
The refrigerator temperature will vary depending on
the quantity of the food stored and on the
frequency with which the door is opened.
To turn the control to the "OFF" position, rotate the
control knob to the "0° position. If the refrigerator
has been left out of use for some time, set the
control to maximum for 2-3 hours before turning to
the desired position. If the refrigerator is not being
used for long time periods, disconnect the plug and
leave the door partially open. This will help to
reduce mold/mildew from accumulating inside the
refrigerator cabinet.
• Changes in ambient room temperature will affect
internal refrigerator temperatures (choose correct
setting of the thermostat knob).
• In STOP (0) position the appliance does not
operate (cooling system is switched off), yet
power supply is not interrupted (the light is on ,
when you open the refrigerator door).
• Temperature in the refrigerator also depends on
how often the door is opened.
FIG A
6